Official Luthiers Forum!

Does anybody use a Woodmaster 718 Molder/Planer/Sander/Saw? I thought about buying one.

Red:

I don't have this machine, and don't know much about it, but I do have a Woodmaster drum sander, and it is high quality, top to bottom. Great support too.

-Mark

_________________
Pullman, WA

The more I know, the more I know I don't know.

trippguitars.com
OR
Find me on Facebook

Red,
Is this machine going to be primarily for lutherie related work. If so, I just
recommend getting the drum sander and buying other machines for the
other tasks.

The other features of the all-in-one seem a bit limited and will not be
nearly as versatile as stand-alone machines.

I heartily recommend the Woodmaster drum sander tho' - I am building
three guitars right now - spruce/asian ebony + redwood/claro walnut +
cedar/mahogany. I thicknessed the back and sides in just a few minutes
for all the guitars. I have good dust collection and would describe the
drum as almost "self-cleaning" on non-oily woods. I had a Performax
before the Woodmaster and have been astounded at the performance leap
with this machine. The ideal machine for the luthier.

I have some shop pictures of my drum sander here:

http://www.fayguitars.com/guitars/visuals/workshop.html

Best of luck, friend.

SimonSimonF38777.5866550926

I use the wood master planer. I've had it since the early 90's. It has the ability to change from planer to sander. The change over takes about 15-20 minutes and is relatively easy compared to most multipurpose planers. While thi initial investment is fairly steep For me it's been worth every penny. The 18 inch table is great.

Initially I use it to produce victorian moldings but for the past 6 years I've been using it mainly for my luthier work. The service from woodmasters is excellent.

If you decide to purchase one, get the variable speed feed rolls, almost a necessity when working with exotic hardwoods.